Configuration With Web Based Management; General Information On Web Based Management - Siemens SCALANCE W786-xPRO Operating Instructions Manual

5.6

Configuration with Web Based Management

5.6.1

General information on Web Based Management

Navigation bar
You will find the following links in the upper menu bar of Web Based Management (WBM):
● Console
● Support
● Logout
● Help
Updating the Display with Refresh
Web Based Management pages that display current parameters have a "Refresh" button at
the lower edge of the page. Click this button to request up-to-date information from the
device for the current page.
Saving entries with Set Values
Pages in which you can make configuration settings have a "Set Value" button at the lower
edge. Click this button to save the configuration data you have entered on the device.
Creating entries with NEW
Pages in which you can create lists have the "New" button at the lower edge. Click this
button to create a new entry in the list.
Resetting a counter with Reset Statistics
With this button, you can reset the relevant counters.
Note on Login User
If you log on as user, you will only have restricted use of WEB and Telnet. Since you only
have read access, some commands do not exist in Telnet and some areas cannot be
selected.
SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
This link opens a console window in which you can enter CLI commands.
When you click this link, you open a SIEMENS AG support page in the Internet.
Close the current Web Based Management session by clicking on this link. The logon
dialog is then displayed again.
Clicking on this link opens the online help of Web Based Management in a separate
browser window.
Configuration / project engineering
5.6 Configuration with Web Based Management
97