Siemens SCALANCE W786-xPRO Operating Instructions Manual page 35

Procedure
Figure 3-6
Follow the steps below to screw a SCALANCE W786 to a wall:
1. Lead the cables into the housing of the SCALANCE W786 (position A in the figure
2. Secure the SCALANCE W786 to the wall with three screws (position B in the figure
SCALANCE W786-xPRO
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
SCALANCE W786 wall mounting
above). Note the information in the section "Connecting up cables".
above). The screws are not supplied with the device. The type and length of the screws
depend on the type of wall.
Type of screw:
– for wooden walls: wood screw 4 x 30 mm
– for concrete walls: 4 x 50 mm with 5 mm concrete plug
– for metal walls: M4 x 25 mm with machine thread in the wall
3.3 Mounting without an adapter (wall mounting only)
B
A
Assembly
35