Siemens SCALANCE W786-xPRO Operating Instructions Manual page 198

Configuration / project engineering
5.7 Configuration with the Command Line Interface
keysrc [0..2]
defkey [1|2|3|4]
wpaphrase [WPA
password]
grkint [interval]
supssid [E|D]
intracom [A|I|E]
ssidcom [E|D]
username [name]
password [password]
chkserver [E|D]
radauth
preauth
aging
198
Select the key source.
Enter 0 as the parameter if the key is
managed by the server. Enter 1 if the
key will be provided by a RADIUS
server. Enter 2 if mixed operation is
required.
Select the default WEP key.
Enter the WPA-PSK password.
Specifies the "Group Key Update
Intervals" in WPA-PSK.
Enable / disable Close Wireless
System functionality.
Allowed / Intracell or Ethernet
blocking)
Allowed no restriction of data traffic
Intracell blocking of data traffic
between the clients in the
cell
Ethernet blocking of data traffic to
Ethernet
(Enable / Disable communication to
other SSIDs)
Enable data traffic with other
SSIDs permitted
Disable data traffic with other
SSIDs blocked
Specifies the user name for the
RADIUS server.
Specifies the password for the
RADIUS server.
Enables / disables authentication of
the server.
Sets the RADIUS authentication type
to
AUTO
EAP_TLS
EAP_TTLS
PEAP
Enables preauthentication for WPA2
With WPA2, sets the renewal interval
for the PMK in minutes
Comment
✔ ✔
✔ ✔
The password can be 8 to 63 ASCII characters or
exactly 64 hexadecimal characters long.
✔ ✔
Interval in seconds,
(0; 36...36000), 0 = OFF
ᅳ ᅳ
ᅳ ᅳ
ᅳ ᅳ
ᅳ ᅳ
In client mode only.
✔ ✔
In client mode only.
✔ ✔
In client mode only.
✔ ✔
✔ ✔
✔ ✔
✔ ✔
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ᅳ ᅳ
✔ ✔ ᅳ ᅳ
SCALANCE W786-xPRO