The Cli\System Menu; Cli\System Menu Command - Siemens SCALANCE W786-xPRO Operating Instructions Manual

Configuration / project engineering
5.7 Configuration with the Command Line Interface
info
Displays information on the current
menu item.
5.7.2

The CLI\SYSTEM menu

5.7.2.1

CLI\SYSTEM menu command

Mode and locale setting
With the commands in this menu, you set the locale and mode (access point or client).
CLI\SYSTEM>
Command
apmode [E|D|H]
country [xx|?]
name [system name]
location [location]
contact [name]
ping [-c n | -s]
174
Description
Access Point
E
D Client
H HiPath Access Point
(only available for
SCALANCE W788-2RR)
Specifies properties for specific
countries. The country codes
("xx") correspond to ISO 3166.
You can see which countries you
can set after entering the "country
?" command. A list of countries
appears with the corresponding 2-
digit code.
sysName
Assigns a value to the
MIB variable.
sysLocation
Assigns a value to the
MIB variable.
sysContact
Assigns a value to the
MIB variable.
For connection test to partner.
Comment
✔ ✔ ✔
✔ ✔ ✔
Comment
IWLAN/ W744 W746
PB LINK
ᅳ ᅳ ᅳ
This command is not available in the version for USA.
✔ ✔ ✔
Maximum of 255 characters. If you want to use the
name in WDS or redundancy, the maximum length is
32 characters.
✔ ✔ ✔
Maximum of 255 characters.
✔ ✔ ✔
Maximum of 255 characters.
✔ ✔ ✔
Telnet only
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
✔ ✔ ✔
✔ ✔ ✔
W747 W78x W78x
RR
ᅳ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
SCALANCE W786-xPRO