Configuration Using Web Based Management and the Command Line Interface
6
.2
The System Menu
6.2.1
System Information Menu Command
Mode and
Locale Setting
On this page, you make several basic settings for the SCALAN
example, the country and mode
For the SCALANCE W788-2RR, you can also set the Hipath Access Point mode.
When the mode changes from acce
para
meters are cleared except:
●
IP ad
dress
●
S
ubnet mask
●
Gateway addres
●
SSID (only in acce
●
IP address of the default router
●
DHCP flag
●
System name
●
System location
●
System contact
●
Device mode
●
Country code
●
User and Admin IDs
Changing to the HiPath Access Point mode is described in section below.
The Current system time output box informs you about the system time. The
System up time output box informs you about the time that has elapsed since the
last restart.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
(access point or client).
ss point mode to client mode and back, all the
s
ss point mode)
CE W78x, for
104