Changing The System To Standard Mode; Manually Changing The System To Standard Mode - Avaya IP500 Installation Manual

4.12 Changing the System to Standard Mode

If this is not the mode required for the IP Office system, IP Office Manager can be used to change the system to IP Office
Essential Edition.
· For IP Office Release 8.0 and higher, for an IP500v2 system to run in IP Office Essential Edition, its
configuration must include an Essential Edition license. A IP Office Essential Edition system without this
license will not allow any telephony functions.

4.12.1 Manually Changing the System to Standard Mode

The process below will change the mode of the system and default its configuration.
!
WARNING
·
This process will require the IP Office system to reboot in order to complete the process. Any current calls and
services will be ended by the reboot.
1. Using IP Office Manager, receive the configuration from the system.
2. When requested, enter the service user name and password. The defaults are Administrator and Administrator.
3. The IP Office Manager application will automatically switch to its simplified view as the configuration from a system
running in IP Office Basic Edition - Quick Mode.
4. Select File | Advanced | Switch to Standard Mode (Default).
5. The configuration will be changed to a default one for a IP Office Essential Edition system and IP Office Manager will
switch to its advanced view mode.
6. This is a suitable time to begin
to restart in IP Office Essential Edition.
· For IP Office Release 8.0 and higher, for an IP500v2 system to run in IP Office Essential Edition, its
configuration must include an Essential Edition license. A IP Office Essential Edition system without this
license will not allow any telephony functions.
7. Once the system has rebooted, use IP Office Manager to again receive the configuration from the system. The user
name and password for configuration should be the IP Office Standard Version mode defaults Administrator and
Administrator.
IP500/IP500 V2 Installation
IP Office 8.0
initial configuration before sending the configuration back to the IP Office system
102
15-601042 Issue 25i (03 January 2013)
Page 96