Tools And Equipment Required - Avaya IP500 Installation Manual

4.1 Tools and Equipment Required

The following is a general summary of the tools required. Additional tools and equipment will be
required for wall and or rack mounting and to fashion ground cable connections suitable to local
requirements.
· Tools Required
· o 5mm Flat-blade screwdriver.
· o Crosshead screwdriver.
· o Anti-static wrist strap and ground point.
· o RJ45-RJ45 Ethernet LAN Cable.
· o M4 Cross-Head Screwdriver.
· o Tools suitable for crimping a cable spade.
· o If wall mounting, drills and tools for wall mounting fixtures.
· Additional Parts Required
In addition to orderable IP Office equipment, the following items will be required.
· o 14AWG Solid copper wire for ground connection of control units and expansion modules.
· o Cable sleeve matching local regulator requirements for ground wires. Typically green for a functional ground
and green/yellow for a protective ground.
· o If wall mounting, additional fixtures and fittings suitable for the wall type and mounting kit being used.
· o Cable ties and labels for tidying and identifying cables.
· System Administration
1. o Selected method for system administration:
·
Windows PC with IP Office Admin suite installed
·
2. o SD Card reader.
IP500/IP500 V2 Installation
IP Office 8.0
and RJ45 Ethernet LAN port.
65
15-601042 Issue 25i (03 January 2013)
IP500 V2 Installation:
Page 73