Changing the System Date and Time
One phone with a Menu
The user of that phone can then change the date and time displayed on all phones.
Note
•
There will be a short delay before some phones will update their displayed date and time.
To change the date/time:
1. Press
Menu twice.
2. Press Func.
3. Press Next and then press Setup.
4. Press either Date or Time. Enter the new value, in the following format:
•
Date must be 2 digits for the month and day and 4 digits for the year.
•
Use the # key to enter a /. For example; 06/04/2006.
•
When all ten characters have been entered, Next is displayed.
•
To select the day of the week, press and Next/Prev.
•
Time must be 2 digits for the hour and 2 digits for the minutes.
•
Use the * key to enter a :. For example; 10:15.
5. After entering the day or time, press Done.
6. Press
Exit.
4400 and 6400 Series User Guide
IP Office 3.2
key can be allocated as a "System Phone" by the system administrator.
15-601074 Issue 11a (30th June 2006)
Phone Controls
Page 25