Avaya IP500 Installation Manual page 254

Ports Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya earthed 60W external power
381
supply unit supplied with the expansion module. A locale specific
external PSU is required but is not supplied with the module.
DS RJ45 socket. Digital Station port. Used for connection of IP Office
381
connected to an
devices in addition to the buildings primary protection. The module must also be connected to a
protective ground.
DTE 9-Way D-Type socket. For Avaya use only.
146
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
384
Expansion Interconnect cable supplied with the module.
Protective Ground point. Use of a protective ground is required for all installations, see
(Earthing)
Phone Barrier Box V2 (101V) is required at both ends, see
Connections
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system.
Item
IP400 Digital Station V2
IEC60320 C13 Power Cord
IP400 Rack Mounting Kit
Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not
include a locale specific power cord for the external PSU or any phone extension cables.
IP500/IP500 V2 Installation
IP Office 8.0
out-of-building extension
. Where the module is connected to analog extensions in another building, an IP Office
39
.
40
Variant
16 Ports
30 Ports
CEE7/7
BS1363
NEMA5-15P
IEC60320 C13 power cord
supported DS phones
, the connection must be made via additional IROB barrier
40
Lightning Protection/Out-of-Building
Country
All
Europe
United Kingdom
America
All
34
. If
44
Grounding
SAP Code
700359839
700359847
700289762
700289747
700289770
700210800
15-601042 Issue 25i (03 January 2013)
for the
Page 254