Avaya IP500 Installation Manual page 209

IP500 ETR6 Base Card
IP500/IP500 V2 Installation
IP Office 8.0
217
This card is only supported in an IP500 V2 control unit running in IP
Office Basic Edition - PARTNER® Mode or IP Office Basic Edition - Quick
Mode. It is not supported in IP Office Basic Edition - Norstar Mode or IP
Office Essential Edition.
It provides 6 ETR ports for connection of ETR phones. 2 Analog
extension ports are also provided for emergency use only with an
analog trunk card.
· The card can be fitted with an IP500 trunk daughter card which uses
the base card ports for trunk connection.
· Maximum: 3 per IP500 V2 control unit. Not supported by IP500
control units.
· The analog phone ports do not include a ringing capacitor. Where this
is a requirement, connection should be via a Master socket containing
ringing capacitors.
· If fitted with an IP500 Analog Trunk daughter card, during power
failure phone ports 7 and 8 are connected to analog trunk port 12.
However during normal operation analog phone ports 7 and 8 are not
useable.
System Components: IP500 Base Cards
15-601042 Issue 25i (03 January 2013)
Page 209