Procedure
1. External expansion modules should not be attached to a control unit that has power.
2. If the IP Office system is being installed in a rack, attach the
3. Attach the external expansion module's power supply but do not switch power on.
4. Connect the expansion interconnect cable from the module's EXPANSION port to the EXPANSION port on the control
unit. Make careful note of the port used and include this detail on the cable label and any other system records.
IP500/IP500 V2 Installation
IP Office 8.0
rack mounting kit
to the expansion module.
87
15-601042 Issue 25i (03 January 2013)
Page 90