Display Transceiver Interface - HP 6125XLG Command Reference Manual

Field
RX power(dBm)
TX power(dBm)

display transceiver interface

Use display transceiver interface to display the key parameters of transceiver modules.
Syntax
display transceiver interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. Without this option, the
command displays the key parameters of every transceiver module.
Examples
# Display the key parameters of the transceiver module in interface Ten-GigabitEthernet 1/1/5.
<Sysname> display transceiver interface ten-gigabitethernet 1/1/5
Ten-GigabitEthernet1/1/5 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(m)
Digital Diagnostic Monitoring : YES
Vendor Name
Ordering Name
Table 39 Command output
Field
transceiver information
Transceiver Type
Connector Type
Wavelength(nm)
Description
RX power in dBm, accurate to 0.01 dBm.
TX power in dBm, accurate to 0.01 dBm.
: 1000_BASE_SX_SFP
: LC
: 850
: 550(50um),270(62.5um)
: HP
: JD118B
Description
Transceiver information.
Transceiver type.
Connector type options:
•
MPO—Multi-fiber Push On.
•
LC—1.25 mm/RJ-45 fiber connector developed by Lucent.
•
RJ-45.
•
Fiber transceiver: Central wavelength (in nm) of the transmit laser. If the
transceiver supports multiple wavelengths, every two wavelength values are
separated by a comma.
•
Copper cable: Displayed as N/A.
214