Time At - HP 6125XLG Command Reference Manual

undo system-working-mode
Default
The device operates in advance mode.
Views
System view
Predefined user roles
network-admin
Parameters
advance: Sets the operating mode of the device to advanced.
standard: Sets the operating mode of the device to standard.
Usage guidelines
After changing the operating mode, you must reboot the device to make the device operate in the new
mode.
Examples
# Set the operating mode to advanced.
<Sysname> system-view
[Sysname] system-working-mode advance
Do you want to change the system working mode? [Y/N]:y
The system working mode is changed, please save the configuration and reboot the system
to make it effective

time at

Use time at to specify an execution date and time for a one-time schedule.
Use undo time to remove the execution time configuration for a schedule.
Syntax
time at time date
undo time
Default
No execution time or date is specified for a schedule.
Views
Schedule view
Predefined user roles
network-admin
Parameters
time: Specifies the schedule execution time in the format hh:mm, where hh is in the range of 0 to 23, and
mm is in the range of 0 to 59.
date: Specifies the schedule execution date in the format MM/DD/YYYY or YYYY/MM/DD. The YYYY
value is in the range of 2000 to 2035, the MM value is in the range of 1 to 12, and the value range for
DD depends on the month value.
233