HP 6125XLG Command Reference Manual page 29

Parameters
number1: Specifies the absolute number of a user line, in the range of 0 to 83.
aux: Specifies the AUX line.
console: Specifies the console line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value range is 0 to 9 for the AUX or console
line and 0 to 63 for the VTY line.
summary: Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
Usage guidelines
This is an older command reserved for backward compatibility purposes. Although it has the same
functionality and output as the display line command, HP recommends that you use the display line
command.
Examples
# Display user line information.
<Sysname> display user-interface 0
Idx Type
0 AUX 0
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 3 Command output
Field Description
Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen
Modem
(-) is displayed.
# Display summary information about all user lines.
<Sysname> display user-interface summary
Line type : [CON]
Line type : [AUX]
Line type : [VTY]
Tx/Rx Modem Auth
9600 -
0:UXXX XXXX XX
10:XXXX XXXX XX
20:XUXX XXXX XXXX XXXX
36:XXXX XXXX XXXX XXXX
52:XXXX XXXX XXXX XXXX
68:XXXX XXXX XXXX XXXX
Int
N -
21