Ftp Ipv6 - HP 6125XLG Command Reference Manual

The source address specified with the ftp ipv6 command takes precedence over the source address
specified with the ftp client ipv6 source command.
The source address specified with the ftp client ipv6 source command applies to all FTP connections. The
source address specified with the ftp ipv6 command applies only to the current FTP connection.
Examples
# Specify source IPv6 address 2000::1 for outgoing FTP packets.
<Sysname> system–view
[Sysname] ftp client ipv6 source ipv6 2000::1
Related commands

ftp ipv6

ftp ipv6
Use ftp ipv6 to log in to an FTP server and enter FTP client view.
Syntax
ftp ipv6 [ ftp-server [ service-port ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source { ipv6
source-ipv6-address | interface interface-type interface-number } ] * [ -i interface-type
interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
ftp-server: Specifies the IPv6 address or host name of an FTP server. A host name can be a
case-insensitive string of 1 to 253 characters. Valid characters for a host name include letters, digits,
hyphens (-), underscores (_), and dots (.).
service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The default
value is 21.
dscp dscp-value: Specifies the DSCP value for IPv6 to use in outgoing FTP packets to indicate the packet
transmission priority, in the range of 0 to 63. The default is 0.
source { ipv6 source-ipv6-address | interface interface-type interface-number }: Specifies the source
address used to establish the FTP connection.
interface interface-type interface-number: Specifies an interface by its type and number. This
•
parameter can be used only when the FTP server address is a link local address and the specified
output interface has a link local address. For more information about link local addresses, see
Layer 3—IP Services Configuration Guide.
• ipv6 source-ipv6-address: Specifies an IPv6 address. This address must be an address that has
been configured on the device.
vpn-instance vpn-instance-name: Specifies the VPN instance to which the FTP server belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the FTP server belongs to
the public network, do not specify this option.
93