Install Activate - HP 6125XLG Command Reference Manual

Field
Service name
Platform version
Product version
Supported board
[Component]
Component
Description
Related commands
boot-loader file
•
• install commit

install activate

Use install activate to activate patch images.
Syntax
install activate patch filename slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
patch: Specifies a patch image file.
filename: Specifies the file path of a .bin patch image, a case-insensitive string. The maximum length is
63 characters for the storage-medium:/base-filename.bin segments of the file path. This length limit does
not include the IRF member ID in front of the storage medium segment. The file must be stored in the root
directory of the storage medium on any member device. For more information about specifying a file
path, see "Managing the file system."
slot slot-number: Specifies an IRF member device by its member ID.
Usage guidelines
This command adds patch images to the current image list. The images run immediately after they are
activated. For the image to run at the next startup, you must execute the install commit command.
Description
Image type:
•
boot—Boot image.
•
system—System image.
•
system-patch—System image patch.
•
boot-patch—Boot image patch.
Any other value indicates a feature image.
Platform software version.
Product software version.
Device types supported by the software image. The value can only be mpu, which
represents IRF member devices.
Information about components included in the image file.
Component name.
Component description.
166