Databits; Display Line - HP 6125XLG Command Reference Manual

databits

Use databits to specify the number of data bits for each character.
Use undo databits to restore the default.
Syntax
databits { 5 | 6 | 7 | 8 }
undo databits
Default
Eight data bits are used for each character.
Views
User line view
Predefined user roles
network-admin
Parameters
5: Uses five data bits for each character.
6: Uses six data bits for each character.
7: Uses seven data bits for each character.
8: Uses eight data bits for each character.
Usage guidelines
This command is not supported in VTY line view.
This setting must be the same as that on the configuration terminal.
Examples
# Configure AUX 0 to use five data bits for each character.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] databits 5

display line

Use display line to display user line information.
Syntax
display line [ number1 | { aux | console | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
18