Reset Scheduler Logfile - HP 6125XLG Command Reference Manual

Usage guidelines
CAUTION:
A device reboot might interrupt network services.
•
If the main startup software images are corrupted or missing, you must re-specify a set of main startup
•
software images before using the reboot command to reboot the device. Otherwise, the device cannot
start up.
For data security, the device does not reboot if you reboot the device while the device is performing file
operations.
Use the force keyword only when you cannot reboot the device without using it.
Examples
# Reboot the device when no configuration change has occurred since the last time you saved the
running configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# If any configuration has changed, reboot the device and save the configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
Current configuration will be lost after the reboot, save current configuration? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Configuration is saved to flash successfully.
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# If any configuration has changed, reboot the device but do not save the configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
Current configuration will be lost after the reboot, save current configuration? [Y/N]:n
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# Reboot the device immediately without performing any software check.
<Sysname> reboot force
A forced reboot might cause the storage medium to be corrupted. Continue? [Y/N]:y
Now rebooting, please wait...

reset scheduler logfile

Use reset scheduler logfile to clear job execution log information.
225