Scheduler Schedule - HP 6125XLG Command Reference Manual

undo scheduler reboot
Default
No reboot delay time is specified.
Views
User view
Predefined user roles
network-admin
Parameters
time: Specifies the reboot delay time in the format hh:mm or mm. This argument can consist up to 6
characters. When in the format hh:mm, mm must be in the range of 0 to 59.
Usage guidelines
CAUTION:
Device reboot interrupts network services.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
The device supports only one device reboot schedule. If you configure both the schedule reboot delay
and schedule reboot delay commands or configure one of the commands multiple times, the most recent
configuration takes effect.
Examples
# Configure the device to reboot after 88 minutes. This example assumes that the current time is 1 1:48
a.m. on June 6, 201 1.
<Sysname> scheduler reboot delay 88
Reboot system at 13:16 06/06/2011(in 1 hours and 28 minutes). Confirm? [Y/N]:

scheduler schedule

Use scheduler schedule to create a schedule and enter schedule view. If the schedule already exists, you
enter schedule view directly.
Use undo scheduler schedule to delete a schedule.
Syntax
scheduler schedule schedule-name
undo scheduler schedule schedule-name
Default
No schedule exists.
Views
System view
Predefined user roles
network-admin
Parameters
schedule-name: Specifies the schedule name, a case-sensitive string of 1 to 47 characters.
230