Ipv6 Address; Ipv6 Gateway - HP 6125XLG Command Reference Manual

ipv6 address

Use ipv6 address to assign an IPv6 address to the management Ethernet port.
Use undo ipv6 address to restore the default.
Syntax
ipv6 address ipv6-address prefix-length
undo ipv6 address
Default
The management Ethernet port has no IPv6 address.
Views
Management Ethernet port view
Parameters
ipv6-address: Specifies an IPv6 address.
prefix-length: Specifies a prefix length in the range of 1 to 127.
Usage guidelines
The management Ethernet port can have only one IPv6 address. If you execute this command multiple
times, the most recent configuration takes effect.
When the management Ethernet port is manually shut down, assigning it an IPv6 address or removing
its IPv6 address activates it at the same time.
Examples
# Assign IPv6 address 2001::1/64 to the management Ethernet port.
<boot> system-view
[boot] interface m-eth0
[boot-m-eth0] ipv6 address 2001::1 64

ipv6 gateway

Use ipv6 gateway to specify an IPv6 gateway for the management Ethernet port.
Use undo ipv6 gateway to restore the default.
Syntax
ipv6 gateway link-local
undo ipv6 gateway
Default
The management Ethernet port has no IPv6 gateway configured.
Views
Management Ethernet port view
Parameters
link-local: Specifies the Link-local address of an IPv6 gateway.
181