HP 6125XLG Command Reference Manual page 220

Field
TX power low
Temp high
Temp low
Voltage high
Voltage low
Transceiver info I/O error
Transceiver info checksum error
Transceiver type and port configuration
mismatch
Transceiver type not supported by port hardware
QSFP+:
RX signal loss in channel x
TX fault in channel x
TX signal loss in channel x
RX power high in channel x
RX power low in channel x
TX bias high in channel x
TX bias low in channel x
Temp high
Temp low
Voltage high
Voltage low
Transceiver info I/O error
Transceiver info checksum error
Transceiver type and port configuration
mismatch
Transceiver type not supported by port hardware
Examples
# Display the alarms present on the transceiver module in interface Ten-GigabitEthernet 1/1/5.
<Sysname> display transceiver alarm interface ten-gigabitethernet 1/1/5
Ten-GigabitEthernet1/1/5 transceiver current alarm information:
RX loss of signal
RX power low
Table 37 Command output
Field
transceiver current alarm information
Description
The transmitted optical power is low.
The temperature is high.
The temperature is low.
The voltage is high.
The voltage is low.
Transceiver information read/write error.
Transceiver information checksum error.
The type of the transceiver module does not match the port
configuration.
The port does not support this type of transceiver modules.
Signal loss occurred in the inbound direction of the
specified channel.
Transmission error occurred in the specified channel.
Transmitted signals were lost in the specified channel.
The received optical power is high in the specified channel.
The received optical power is low in the specified channel.
The transmitted bias current is high in the specified channel.
The transmitted bias current is low in the specified channel.
The temperature is high.
The temperature is low.
The voltage is high.
The voltage is low.
Transceiver information read/write error.
Transceiver information checksum error.
The type of the transceiver module does not match the port
configuration.
The port does not support this type of transceiver module.
Description
Alarms present on the transceiver module.
212