Tftp-Server Acl; Tftp-Server Ipv6 Acl - HP 6125XLG Command Reference Manual

Examples
# Specify source IPv6 address 2000::1 for outgoing TFTP packets.
<Sysname> system–view
[Sysname] tftp client ipv6 source ipv6 2000::1
Related commands
tftp ipv6

tftp-server acl

Use tftp-server acl to use an ACL to control the device's access to TFTP servers in an IPv4 network.
Use undo tftp-server acl to restore the default.
Syntax
tftp-server acl acl-number
undo tftp-server acl
Default
No ACL is used to control the device's access to TFTP servers.
Views
System view
Predefined user roles
network-admin
Parameters
acl-number: Specifies the number of a basic ACL, in the range of 2000 to 2999.
Usages guidelines
You can use an ACL to deny or permit the device's access to specific TFTP servers.
Examples
# Allow the device to access only the TFTP server at 1.1.1.1.
<Sysname> System-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 1.1.1.1 0
[Sysname-acl-basic-2000] quit
[Sysname] tftp-server acl 2000

tftp-server ipv6 acl

Use tftp-server ipv6 acl to use an ACL to control the device's access to TFTP servers in an IPv6 network.
Use undo tftp-server ipv6 acl to restore the default.
Syntax
tftp-server ipv6 acl acl-number
undo tftp-server ipv6 acl
118