HP 6125XLG Command Reference Manual page 27

Parameters
number1: Specifies the absolute number of a user line, in the range of 0 to 83.
aux: Specifies the AUX line.
console: Specifies the console line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value range is 0 to 9 for the AUX or console
line and 0 to 63 for the VTY line.
summary: Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
Examples
# Display user line information.
<Sysname> display line 0
Idx Type
0 AUX 0
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 1 Command output
Field Description
Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen
Modem
(-) is displayed.
# Display summary information about all user lines.
<Sysname> display line summary
Line type : [CON]
Line type : [AUX]
Line type : [VTY]
2 lines used.
82 lines not used.
Tx/Rx Modem Auth
9600 -
0:UXXX XXXX XX
10:XXXX XXXX XX
20:XUXX XXXX XXXX XXXX
36:XXXX XXXX XXXX XXXX
52:XXXX XXXX XXXX XXXX
68:XXXX XXXX XXXX XXXX
(U)
(X)
Int
N -
19