Tftp Commands; Tftp - HP 6125XLG Command Reference Manual

TFTP commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
TFTP is not supported in FIPS mode.

tftp

Use tftp to download a file from the TFTP server to the local device or upload a local file to the TFTP server
in an IPv4 network.
Syntax
tftp tftp-server { get | put | sget } source-filename [ destination-filename ] [ vpn-instance
vpn-instance-name ] [ dscp dscp-value | source { interface interface-type interface-number | ip
source-ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
tftp-server: Specifies the IPv4 address or host name of a TFTP server. The host name can be a
case-insensitive string of 1 to 253 characters and can contain only letters, digits, hyphens (-), underscores
(_), and dots (.).
get: Downloads a file and writes the file directly to the destination file. If the destination file already exists,
the system deletes the existing file before starting the download operation. The existing file is
permanently deleted even if the download operation fails.
put: Uploads a file.
sget: Downloads a file and saves the file to memory before writing it to the destination file. The system
starts to write the downloaded file to the destination file only after the downloaded file is saved to
memory successfully. If the destination file already exists, the downloaded file overwrites the existing file.
If the download or save-to-memory operation fails, the existing file is not overwritten.
source-filename: Specifies the source file name, a case-insensitive string of 1 to 1 to 255 characters.
destination-filename: Specifies the destination file name, a case-insensitive string of 1 to 255 characters.
If this argument is not specified, the file uses the source file name.
vpn-instance vpn-instance-name: Specifies the VPN instance to which the TFTP server belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the TFTP server belongs to
the public network, do not specify this option.
dscp dscp-value: Specifies the DSCP value for IPv4 to use for outgoing TFTP packets to indicate the packet
transmission priority, in the range of 0 to 63. The default is 0.
113