HP 6125XLG Command Reference Manual page 124

Predefined user roles
network-admin
Parameters
tftp-server: Specifies the IPv6 address or host name of a TFTP server. The host name can be a
case-insensitive string of 1 to 253 characters and can contain only letters, digits, hyphens (-), underscores
(_), and dots (.).
-i interface-type interface-number: Specifies an output interface by its type and number. This parameter
can be used only when the TFTP server address is a link local address and the specified output interface
has a link local address. For link local address configuration, see Layer 3—IP Services Configuration
Guide.
get: Downloads a file and writes the file directly to the destination file. If the destination file already exists,
the system deletes the existing file before starting the download operation. The existing file is
permanently deleted even if the download operation fails.
put: Uploads a file.
sget: Downloads a file and saves the file to memory before writing it to the destination file. The system
starts to write the downloaded file to the destination file only after the downloaded file is saved to
memory successfully. If the destination file already exists, the downloaded file overwrites the existing file.
If the download or save-to-memory operation fails, the existing file is not overwritten.
source-file: Specifies the source file name, a case-insensitive string of 1 to 255 characters.
destination-file: Specifies the destination file name, a case-insensitive string of 1 to 255 characters. If this
argument is not specified, the file uses the source file name.
vpn-instance vpn-instance-name: Specifies the VPN instance to which the TFTP server belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the TFTP server belongs to
the public network, do not specify this option.
dscp dscp-value: Specifies the DSCP value for IPv6 to use in outgoing TFTP packets to indicate the packet
transmission priority, in the range of 0 to 63. The default is 0.
source { interface interface-type interface-number | ipv6 source-ipv6-address }: Specifies the source
address for outgoing TFTP packets. If this keyword is not specified, the device uses the primary IPv6
address of the output interface for the route to the server as the source IPv6 address of outgoing TFTP
packets.
interface interface-type interface-number: Specifies an interface by its type and number. The
•
primary IPv6 address of this interface will be used as the source IPv6 address for outgoing TFTP
packets. Make sure the interface is up and has the primary IPv6 address configured. Otherwise, the
transmission fails.
• ipv6 source-ipv6-address: Specifies an IPv6 address. This address must be the IPv6 address of an
interface in up state. Otherwise, the transmission fails.
source { interface interface-type interface-number | ipv6 source-ipv6-address }: Specifies the source
address for outgoing TFTP packets. If this keyword is not specified, the device automatically selects a
source IPv6 address. For more information, see RFC 3484.
• interface interface-type interface-number: Specifies an interface by its type and number. The IPv6
address of this interface will be used as the source address for outgoing TFTP packets. Make sure
the interface is up. Otherwise, the transmission fails.
ipv6 source-ipv6-address: Specifies an IPv6 address. This address must be the IPv6 address of an
•
interface in up state. Otherwise, the transmission fails.
116