Open; Passive - HP 6125XLG Command Reference Manual

Examples
# Update the local file with the file a.txt on the FTP server.
ftp> newer a.txt
local: a.txt remote: a.txt
150 Connecting to port 63513
226 File successfully transferred
1573 bytes received in 0.0293 seconds (52.3 kbyte/s)

open

Use open to log in to the FTP server in FTP client view.
Syntax
open server-address [ service-port ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
server-address: Specifies the IP address or host name of the FTP server.
service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The default
value is 21.
Usage guidelines
After you issue this command, the system will prompt you to enter the username and password.
After you log in to one FTP server, you must disconnect from the server before you can use the open
command to log in to another server.
Examples
# In FTP client view, log in to the FTP server 192.168.40.7.
<Sysname>ftp
ftp> open 192.168.40.7
Press CTRL+C to abort.
Connected to 192.168.40.7 (192.168.40.7).
220 FTP service ready.
User (192.168.40.7:(none)): root
331 Password required for root.
Password:
230 User logged in.
Remote system type is HP.
ftp>

passive

Use passive to set the FTP operation mode to passive.
99