Monitor Cpu-Usage Interval - HP 6125XLG Command Reference Manual
Blade
Hide thumbs
Also See for 6125XLG:
- Layer 3 - ip routing configuration manual (492 pages) ,
- Command reference manual (466 pages) ,
- Configuration manual (414 pages)
Table of Contents
Advertisement
Examples
# Enable CPU usage recording.
<Sysname> system-view
[Sysname] monitor cpu-usage enable
Related commands
display cpu-usage
•
display cpu-usage configuration
•
display cpu-usage history
•
monitor cpu-usage interval
•
•
monitor cpu-usage threshold
monitor cpu-usage interval
Use monitor cpu-usage interval to set the CPU usage sampling interval.
Syntax
monitor cpu-usage interval interval-value [ slot slot-number]
Default
The CPU usage sampling interval is 1 minute.
Views
System view
Predefined user roles
network-admin
Parameters
interval-value: Specifies the CPU usage sampling interval. Valid values include 5Sec (5 seconds), 1Min
(1 minute), and 5Min (5 minutes).
slot slot-number: Specifies an IRF member device by its member ID. Without this option, the command
sets the CPU usage sampling interval for the master.
Examples
# Set the CPU usage sampling interval to 5 seconds.
<Sysname> system-view
[Sysname] monitor cpu-usage interval 5Sec
Related commands
display cpu-usage
•
•
display cpu-usage configuration
display cpu-usage history
•
monitor cpu-usage enable
•
•
monitor cpu-usage threshold
222
Advertisement
Table of Contents
