flash:
quit
Use quit to return to the upper level view.
Syntax
quit
Views
System view, management Ethernet port view
Examples
# Return from management Ethernet port view to user view.
[boot-m-eth0] quit
[boot] quit
<boot>
reboot
Use reboot to reboot the current member device.
Syntax
reboot
Views
User view
Examples
# Reboot the current member device.
<boot> reboot
reset ssh public-key
Use reset ssh public-key to delete all server public keys saved on the device.
Syntax
reset ssh public-key
Views
User view
Usage guidelines
When you use the ssh2 command to connect to an SSH server for the first time, the device saves a copy
of the server's public key locally so it can use the public key to authenticate the server when you connect
to the server again. If the server changes its public key, the public keys will not match anymore and you
cannot connect to the server. To solve this problem, use this command to delete all server public keys
saved on the device.
Examples
# Delete all server public keys saved on the device.
186