Cisco TelePresence SX20 Codec
Contents
Introduction
xStatus Conference DoNotDisturb
Shows whether DoNotDisturb mode is switched on or not.
Value space of the result returned:
<Active/Inactive>
Example:
xStatus Conference DoNotDisturb
*s Conference DoNotDisturb: Inactive
** end
xStatus Conference ActiveSpeaker Mode
Shows whether the ActiveSpeaker mode is switched on or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Conference ActiveSpeaker Mode
*s Conference ActiveSpeaker Mode: Off
** end
xStatus Conference ActiveSpeaker SiteId
Returns the SiteId (CallId) of the current active speaker.
Value space of the result returned:
<Integer>
Example:
xStatus Conference ActiveSpeaker SiteId
*s Conference ActiveSpeaker SiteId: 0
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API
xConfiguration
Diagnostics status
xStatus Diagnostics
xStatus Diagnostics Call [1..n] Channels IncomingAudioChannel [1..n] Netstat 1 Jitter
xStatus Diagnostics Call [1..n] Channels IncomingVideoChannel [1..n] Netstat 1 Jitter
xStatus Diagnostics Call [1..n] Channels IncomingDataChannel [1..n] Netstat 1 Jitter
xStatus Diagnostics Call [1..n] Channels OutgoingAudioChannel [1..n] Netstat 1 Jitter
xStatus Diagnostics Call [1..n] Channels OutgoingVideoChannel [1..n] Netstat 1 Jitter
xStatus Diagnostics Call [1..n] Channels OutgoingDataChannel [1..n] Netstat 1 Jitter
131
xCommand
Shows the top level overview of the diagnostics. The example shows the status for an ongoing call.
The identities of the call and channels are used when querying additional information.
Shows the jitter at the present moment in the incoming/outgoing channel, as specified by RFC
3550.
Value space of the result returned:
<Integer>
Example:
xStatus Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1
Jitter
*s Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1 Jitter:
0
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.
Need help?
Do you have a question about the TelePresence SX20 Codec and is the answer not in the manual?
Questions and answers