Programming Example Without Using The Utility Package - Mitsubishi Electric Q68AD-G User Manual

6
PROGRAMMING
6.5.2
(1) Operating GX Developer (CPU parameter setting)
6.5 For Use in Remote I/O Network (Q66AD-DG)
6
- 35

6.5.2 Programming example without using the utility package

Programming example without using the utility package
The dedicated instructions used for reading/writing the buffer memory of the
intelligent function module on a remote I/O station (REMTO and REMFR) are the
execution type for which several scans are needed. Therefore, transmissions of
the execution results are not synchronized with the I/O signal operations. When
reading a digital output value on an A/D converter module after changing the
operating condition during operation, be sure to read the A/D conversion
completed flag (buffer memory address 10) at the same time.
Also, for the case of changing the operating condition, insert an interlock to
prevent the execution of the REMFR instruction.
Network type
Starting I/O No.
Network No.
Total stations
Mode
Network range assignment :
Refresh parameters
: MNET/H (Remote master)
: 0000
H
: 1
: 1
: Online
: