Mitsubishi Electric Q68AD-G User Manual page 144

5
UTILITY PACKAGE (GX Configurator-AD)
[Explanation of items]
(1) Items
(2) Command buttons
(3) Example of using "Execute test"
5.6 Monitoring/Test
5
- 20
5.6.1 Monitor/test window
Setting item : Displays I/O signals and buffer memory names.
Current : Monitors the I/O signal states and present buffer memory
value values.
Setting value : Select or enter the data to be written during test operation.
Current value display
Make text file
/
Start monitor
Stop monitor
Execute test
Close
The following is an example to change sampling processing of CH1 to count averag-
ing processing in 10 times.
(a) Click the
(b) Set CH1 Averaging process specification to "Count".
(c) Click the setting field of CH1 Average time/Average number of times/Move aver-
age/Time constant settings.
(d) Input "10" as the number of averaging, then click the
At this point, CH1 is still set to sampling processing.
(e) Select the setting areas (b) to (d), holding the
Multiple items can be selected by dragging the mouse over them also.
(f) Click the
After the writing is completed, the written values are displayed in the "Current
value" field.
Displays the current value of the item selected.
(This is used to check the text that cannot be dis-
played in the current value field. However, in this
utility package, all items can be displayed in the dis-
play fields).
Creates a file containing the window data in text file
format.
Selects whether or not to monitor current values.
Performs a test on the selected items. To select
more than one item, select them while holding down
the key.
Ctrl
Closes the window that is currently open and
returns to the previous window.
button in the "Monitor/Test" window.
Ctrl
button to write the data.
key.
Enter
key.