Mitsubishi Electric Q68AD-G User Manual page 206

7
ONLINE MODULE CHANGE
7.3 Online Module Change Procedure
7
- 11
7.3.2 When industrial shipment setting is used and initial setting was made with sequence program
(b) Click the "Execution" button to enable a module change.
If the following error window appears, click the [OK] button, dismount the module
as-is, and mount a new module.
(c) After confirming that the "RUN" LED of the module has turned off, remove the
connector and dismount the module.
Always dismount the module. If mounting confirmation is made without the
module being dismounted, the module will not start properly and the "RUN" LED
will not be lit.