When User Range Setting Is Used And Initial Setting Was Made With Sequence Program (Other System Is Available) - Mitsubishi Electric Q68AD-G User Manual

7
ONLINE MODULE CHANGE
7.3.5 When user range setting is used and initial setting was made
with sequence program (other system is available)
(1) Conversion disable
(2) Dismounting of module
7.3.5 When user range setting is used and initial setting was made with sequence program (other system is
(a) Set the A/D conversion enable/disable setting (Un\G0) for all channel conversion
disable and turn operating condition setting request (Y9) from OFF to ON to stop
conversion.
After confirming that conversion has stopped with the A/D conversion completion
flag (Un\G10), turn off Operation Condition Setting Request (Y9).
(The window shows the setting example of the Q68AD-G.)
(a) After choosing [Diagnosis] - [Online module change] on GX Developer to enter the
"Online module change" mode, double-click the module to be changed online to
display the "Online module change" window.
7.3 Online Module Change Procedure
1
2
3
4
5
6
7
8
7
- 26