Mitsubishi Electric Q68AD-G User Manual page 166

6
PROGRAMMING
(2) Programming example
Initial settings
Read digital output values
Warning (process alarm, rate alarm) occurrence status and processing at warning occurrence
6.2 For Use in Normal System Configuration (Q68AD-G)
6
- 9
6.2.3 Programming example without using the utility package
Turns ON Module
ready check flag.
A/D conversion enable
/disable setting
CH2 Average time/
Average number of times/
Move average/Time constant settings
CH3 Average time/
Average number of times/
Move average/Time constant settings
Averaging process
specification
Input signal error detection settings
Warning output settings
CH2 process alarm lower
lower limit value
CH2 process alarm lower
upper limit value
CH2 process alarm upper
lower limit value
CH2 process alarm upper
upper limit value
CH3 rate alarm warning
detection period
CH3 rate alarm upper
limit value
CH3 rate alarm lower
limit value
CH1 input signal error
detection setting value
Turns ON operation condition
setting request (Y9).
Turns OFF Module
ready check flag.
Turns OFF operation condition
setting request (Y9)
Read the A/D conversion
completed flag.
Read the CH1 digital output value.
Read the CH2 digital output value.
Read the CH3 digital
output value.
Read the warning
output flag. (Process alarm)
Read the warning
output flag. (Rate alarm)
Processing at CH2 process
alarm upper limit value
Processing at warning occurrence
warning occurrence
Processing at CH2 process
alarm lower limit value
Processing at warning occurrence
warning occurrence
Processing at CH3 rate
Processing at warning occurrence alarm upper limit value
warning occurrence
Processing at CH3 rate
Processing at warning occurrence alarm lower limit value
warning occurrence