5
UTILITY PACKAGE (GX Configurator-AD)
5.6.4
Pass data (Q68AD-G)
Perform operation in the following sequence to save/restore the user range.
(1) Switch to the pass data window
Perform the operation in Section 5.6.1 to display the Pass data window.
(2) User range saving
(a) Set "Voltage specified" or "Current specified" in the Setting value field of Pass
(b) Change the Setting value field of Pass data read request to "Request", and click
(c) Compare the values with those in the range reference table, and record them if
data classification setting, and click the
When the setting is completed, the set data is displayed in the Current value field
of CH
Pass data classification setting.
the
button.
Execute test
When read is completed, the values are displayed in the Current value fields of
CH
Industrial shipment settings offset/gain values/CH
offset/gain values.
they are correct.
Refer to Section 7.4 for the range reference table.
button.
Execute test
User range settings
5.6 Monitoring/Test
5.6.4 Pass data (Q68AD-G)
1
2
3
4
5
6
7
8
5
- 25