6 PROGRAMMING
6.1.1 Program example used when utility package is used
(1) Operation of utility package
6 - 2
(a) Initial setting (refer to Section 5.4)
Set CH.1 for sampling process, CH.2 for average process per 500 times, and
CH.3 for average process per 1000ms.
(b) Automatic refresh settings (refer to Section 5.5)
Set the CH.1 to CH.3 temperature measurement values and error code.
(c) Write of intelligent function module parameters (refer to Section 5.3.3)
Write the intelligent function module parameters to the CPU module. Perform
this operation on the parameter setting unit selection screen.
MELSEC-Q
6
6 - 2