Mitsubishi Electric Q68AD-G User Manual page 103

4
SETUP AND PROCEDURES BEFORE OPERATION
4.2 Setup and Procedures before Operation
Module mounting
Mount the A/D converter module in the specified slot.
Wiring
Wire external devices to the A/D converter module.
Intelligent function module switch settings
Perform settings using GX Developer
(Refer to Section 4.5).
Offset/gain setting
If user range settings are used, perform the
offset and gain settings (Refer to Section 4.6).
Initial setting and auto refresh setting
The program can be simplified if the utility
package is used for setting (Refer to Chapter 5 ).
Programming and debugging
Create and check the sequence program.
Start
Use user range settings?
Use user range settings
Use the utility package?
YES
Use factory defaults
settings
NO
4.2 Setup and Procedures before Operation
1
2
3
4
5
6
7
8
4
- 3