Fb Conversion Of Initial Setting/Auto Refresh Setting - Mitsubishi Electric Q68AD-G User Manual

5
UTILITY PACKAGE (GX Configurator-AD)
5.7

FB Conversion of Initial Setting/Auto Refresh Setting

[Purpose]
[Operating procedure]
[Setting window]
[Explanation of items]
(1) Items displayed on the window
5.7 FB Conversion of Initial Setting/Auto Refresh Setting
5
- 28
FB is generated automatically from the intelligent function module parameter (initial
setting/auto refresh setting).
Intelligent Function Module Parameter Setting Module Selection Window
<<FB Support Parameter>>
Start I/O No. : The start I/O No. of the information which is set up on the
Module model name : The module model name of the information which is set up on
Initial setting : Set up whether to apply FB conversion to the parameter or not.
Auto refresh : Set up whether to apply FB conversion to the parameter or not.
FB program name : Set up the name of the converted FB program.
Title : Set up a title on a converted FB program. Up to 32 single-byte
FB conversion
currently open intelligent function module parameter is
displayed.
the currently open intelligent function module parameter is
displayed.
Check if you apply FB conversion to the parameter.
Check if you apply FB conversion to the parameter.
Up to six single-byte characters can be set up as an FB
program name.
However, the characters and terms shown below cannot be set
up as FB program name.
Character:\, /, :, ;, *, ?, ", <, >, |, ,
Term :COM1 to COM9, LPT1 to LPT9, AUX, PRN, CON, NUL,
CLOCK$
In addition, I- is added for initial setting and A- is added for
auto refresh setting respectively to the top of the FB name
setting to be registered in GX Developer after FB conversion is
performed.
Ex.:If the FB program name is "ABCDE, " the initial setting is
"I-ABCDE" and the auto refresh setting is "A-ABCDE".
characters can be set up as a title.