8
TROUBLESHOOTING
(1) When two or more errors have occurred, the latest error found by the A/D
converter module is stored.
(2) The error codes marked with *1 can be cleared by turning ON the error clear
request (YF).
(3) Error code 161 marked with *2 is not stored in the Error code (Un\G19) area.
It is written to the Completion status area, (S) + 1, of the G(P).OGSTOR
instruction.
(4) The error codes marked with *3 can be cleared by one of the following opera-
tions.
(a) Turning on the error clear request (YF)
(b) Turning on the operating condition setting request (Y9) after correcting the
set value to the one in the setting range
8.1 Error Code List
1
2
3
4
5
6
7
8
8
- 4