Headset Mode Activation/Deactivation; Headset Prior - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
To activate the headset mode:
1. Press
The headset icon on the idle screen indicates that the headset mode is activated.
Press the line key or the A nswer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the Se nd soft key, the phone will then
place a call using the headset automatically. For more information on using the
headset to place a call, refer to
To deactivate the headset mode:
1. Press
The headset icon disappears from the idle screen indicates the headset mode is
deactivated.
You can use headset in priority when headset prior feature is enabled. This feature is
especially useful for permanent or full-time headset users.
To e nable headset prior via web user interface:
1. Click on F e atures->General Information.
2. Select Enabled from the pull-down list of He adset Prior.
3. Click Conf irm to accept the change.
50
on the phone.
Placing Calls
again on the phone.
on page 72.