To Place Multiple Calls - Yealink SIP-T40P User Manual

Enter the desired number using the keypad.
Press
With the handset on-hook, enter the desired number using the keypad.
-
Press
To place a call using t he headset:
Do one of the following:
With the optional headset connected, press
-
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
With the optional headset connected, press
-
Enter the desired number using the keypad.
Press
Not e
To permanently use the headset mode, refer to
The SIP-T40P IP phone can handle multiple calls at a time. However, only one active call
(the call that has audio associated with it) can be in progress at any time, other calls
are placed on hold. The SIP-T40P IP phone can handle a maximum of 50 calls at one
time.

To place multiple calls:

You can have more than one call on your SIP-T40P IP phone. To place a new call during
an active call, do one of the following:
Press the line key. The active call is placed on hold.
-
Enter the desired number using the keypad.
Press
- Press the Hold soft key to place the original call on hold.
Press the Ne wCall soft key.
Enter the desired number using the keypad.
Press
You can press
to retrieve the desired call.
Not e If multiple accounts are registered on the phone, you can first press the desired line key
on the idle screen or press the Line soft key on the dialing screen, and then you can use
the selected account to place a call.
, , or the Se nd soft key.
, , , or the Se nd soft key.
, , or the Se nd soft key.
, , or the Se nd soft key.
, , or the Se nd soft key.
, , or the Se nd soft key.
or to switch between calls, and then press the Re s ume soft key
to activate the headset mode.
to activate the headset mode.
Headset Prior on page 50.
Basic Call Features
73