Deleting Contacts - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the
Me nu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select A ll Contacts and press the Enter soft key.
3. Press
4. Press the O ption soft key, and then select De t ail.
5. Press
6. Press the Save soft key to accept change or the Back soft key to cancel.
To delete a contact from the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the
Me nu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select A ll Contacts and press the Enter soft key.
38
or to highlight the desired contact.
or to highlight the contact information and then edit.
(refer to Directory
directory
(refer to Directory
directory
on page 32), press
on page 32), press