Yealink SIP-T40P User Manual page 99

1) Press or
F orward field.
2) Enter the destination number you want to forward all incoming calls to
when the phone is busy in the F orward to field.
3) (Optional.) Enter the busy forward on code or off code respectively in the
O n Code or O f f Code field.
You can also enable busy forward for all accounts. After busy forward was
enabled for a specific account, do the following:
1) Press or
2) Press the A ll Lines soft key.
The LCD screen prompts "Copy to all lines?".
3) Press the O K soft key to accept the change or the Cancel soft key to
cancel.
c) If you select No A nswer Forward, you can enable it for a specific account.
1) Press or
A nswer Forward field.
2) Enter the destination number you want to forward all unanswered
incoming calls to in the F orward to field.
3) Press or
before forwarding from the A f ter Ring Time field.
The default ring time is 12 seconds.
, or the Switch soft key to select Enabled from the Busy
to highlight the Bus y Forward field.
, or the Switch soft key to select Enabled from the No
, or the Switch soft key to select the ring time to wait
Basic Call Features
89