Network Conference; To Join Two Calls In A Conference - Yealink SIP-T40P User Manual

4. When the second party answers the call, press the Conf soft key again to join all
parties in the conference.
You can press

To join two calls in a conference:

1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press or to select the call for conference and ensure that the call is active
(for example, select the call on account 1).
3. Press the Conf soft key to join the two calls in the conference on the selected
account.
During the conference call, y ou can do the following actions:
Press the Hold soft key to place the conference on hold.
-
Press the Split soft key to split the conference call into two individual calls on hold.
-
Press the Manage soft key, and then press
-
Press the F arMute soft key to forbid the party from speaking. The muted party

can hear everyone, but no one can hear the muted party.
Press the Re move soft key to remove the party from the conference call.

Press the Ne wCall soft key to place a new call.

Press the Back soft key to return to the previous screen.

Press to mute the participant. The muted participant can hear everyone, but
-
no one can hear the muted participant.
Press the EndCall soft key to drop the conference call.
-
You can use network conference feature on the SIP-T40P IP phone to conduct a
conference with multiple participants.
This feature allows you to perform the following:
Join two calls together into a conference call.

Invite another party into an active conference call.

or to see all parties in the conference.
Basic Call Features
or to select the desired party:
95