Call Pickup; Directed Call Pickup - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
The system establishes call between phone C and B.
Not e
The call park code and call park retrieve code are predefined on the system server.
Contact your system administrator for more information.
If the parked call is not retrieved within a period of time assigned by the system, the
phone performing call park will receive call back.
You can use call pickup to answer someone else's incoming call on your phone. The
SIP-T40P IP phone supports directed call pickup and group call pickup. Directed call
pickup is used for picking up a call that is ringing at a target phone number. Group call
pickup is used for picking up a call that is ringing at any phone number in a certain
group. The pickup group should be predefined, contact your system administrator for
more information.
You can pick up an incoming call by using the DP ickup/GPickup soft key. To use call
pickup, you need to configure the call pickup code beforehand on a global or per-line
basis via web user interface.
Not e
If there are many incoming calls at the same time, pressing the G Pi ckup soft key on the
phone will pick up the call that rings first.

Directed Call Pickup

To e nable directed call pickup and configure the directed call pickup code on a global
bas is via web user interface:
1. Click on F e atures->Call Pickup.
2. Select Enabled from the pull-down list of Directed Call Pickup.
3. Enter the directed call pickup code in the Directed Call Pickup Code field.
4. Click Conf irm to accept the change.
98