Call Park - Yealink SIP-T40P User Manual

The procedures to set up a network conference call on specific servers may be different
from introduced above. Contact your system administrator for more information.
You can use call park feature to place a call on hold, and then retrieve the call from
another phone in the system (for example, a phone in another office or conference
room). You can park an active call by pressing the call park key on the phone. If the call
is parked successfully, the response is either a voice prompt confirming that the call was
parked, or a visible prompt on the LCD screen.
Not e Call park is not available on all servers. Contact your system administrator for more
information.
To configure a call park key v ia phone user interface:
1. Press Me nu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press
4. Press
5. Press
ID field.
6. (Optional.) Enter a string that will appear on the LCD screen in the L abel field.
7. Enter the call park code in the Value field.
8. Press the Save soft key to accept the change or the Back soft key to cancel.
Call park key is configurable via web user interface at the path DSSKey->Line Key.
To use call park:
1. User on phone A places a call to phone B.
2. User on phone A wants to take the call in a conference room for privacy, and so
presses the call park key on phone A.
3. User on phone A walks to an available conference room where the phone is
designated as phone C. The user dials the call park retrieve code to retrieve the
parked call.
or , or the Switch soft key to select Ke y Event from the Ty pe field.
or , or the Switch soft key to select Call Park from the Ke y Type field.
or , or the Switch soft key to select the desired line from the A ccount
Basic Call Features
97