Local Conference - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
2. Press
field.
3. Press
4. (Optional.) Enter the call waiting on code or off code respectively in the O n Code
or O f f Code field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Call waiting is configurable via web user interface at the path F e atures->General
Inf ormation.
You can create a conference with other two parties using the phone's local conference.
You can create a conference between an active call and a call on hold by pressing the
Conf soft key. The SIP-T40P IP phone also supports network conference.
Not e
Network conference is not available on all servers. For more information, contact your
system administrator.
The SIP-T40P IP phone supports up to 3 parties (including yourself) in a conference call.
This is the default method of conference called Local Conference.
To s et up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, press the Conf soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and press
94
or , or the Switch soft key to select Enabled from the Call Waiting
or , or the Switch soft key to select Enabled from the P lay Tone field.
, , or the Se nd soft key.