Account Registration; To Disable An Account Via Phone User Interface - Yealink SIP-T40P User Manual

To register an account via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->A ccounts.
2. Select the desired account and then press the Enter soft key.
3. Select Enabled from the A ct ive L ine field.
4. Enter the desired value in L abel, Display Name, Re gister Name, User Name,
Password and SIP Server1/2 fields respectively. Contact your system administrator
for more information.
5. If you use the outbound proxy servers, do the following:
1) Press
St atus field.
2) Enter the desired value in the O utbound Proxy1/2 and P roxy Fallback Interval
fields respectively. Contact your system administrator for more information.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
You can repeat steps 2 to 6 to register more accounts.

To disable an account via phone user interface:

1. Press Me nu->Settings->Advanced Settings (default password: admin)
->A ccounts.
2. Select the desired account and then press the Enter soft key.
3. Select Disabled from the A ct ive Line field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Account registration is configurable via web user interface at the path
A ccount->Register.
Default account can be set by pressing
Not e
when placing a call. The phone's default account cannot be changed after reboot.
or , or the Switch soft key to select Enabled from the O utbound
Customizing Your Phone
or on the idle screen. It has priority
61