Dual Headset - Yealink SIP-T40P User Manual

To use headset prior feature, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press
Not e
If headset prior is enabled, the headset mode will not be deactivated until you press the
HEA DSET
key again.
If headset prior is disabled, the headset mode can be deactivated by pressing the
speakerphone key or the
Headset prior is configurable via web user interface only.
You can use two headsets when enabling dual headset. To use this feature, you must
physically connect headsets to the headset jack and handset jack respectively. Once
the phone connects to a call, the headset connected to the headset jack will have
full-duplex capabilities, while the one connected to the handset jack will only be able to
listen.
To e nable dual headset via web user interface:
1. Click on F e atures->General Information.
2. Select Enabled from the pull-down list of Dual-Headset.
3. Click Conf irm to accept the change.
Not e
Dual headset is configurable via web user interface only.
to activate the headset mode.
HEA DSET
key.
Customizing Your Phone
51