Remote Phone Book; To Add A Contact To The Blacklist Directory From The Local Directory - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
4. Press
A ccount field.
If A ut o is selected, the phone will use the default account when placing calls to the
contact from the blacklist directory.
5. Press the A dd soft key to accept the change or the Back soft key to cancel.

To add a contact to the blacklist directory from the local directory:

1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory (refer to
press Me nu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select A ll Contacts and press the Enter soft key.
3. Press
4. Press the O ption soft key, and then select A dd t o Blacklist.
The LCD screen prompts the following warning:
5. Press the O K soft key to confirm the setting.
For operating instructions on editing, deleting, placing calls to and/or searching for
contacts in the blacklist directory, refer to the operating instructions of
page 33.
You can add new contacts to the local directory, search for a contact, or simply dial a
contact number from the remote phone book.
You can configure your new phone to access up to 5 remote phone books. For the
access URL of the remote phone book, contact your system administrator.
44
or , or the Switch soft key to select the desired account from the
or to highlight the desired contact.
Directory on page 32),
Local Directory on